Mounting Hardware 

Trolling Motor TransducerDescription: Trolling motor mount high definition side imaging transducer with built in temperatureFor Use With: 997C

P79 In-hullOur P79 in-hull transducer easily adjusts to hull deadrise angles up to 22°. This ensures that the beam is vertically oriented to receive echos resulting in accurate depth readings. Unlike traditional "puck" type transducers, our P79...

Trolling Motor TransducerTrolling Motor Mount Transducers are designed to mount on to the body of most trolling motors. A low profile shape reduces drag in the water and minimizes interference with weeds. Trolling Motor Transducers are often used in...

10 ft. Extension cable for transducers, w/IDToo much distance between your transducer and fishfinder/sounder? Here's 10 feet of cable to bring them together.

HUMMINBIRD XBTH-9-QB-90-T BRONZE THRU HULL DEPTH/TEMP

Transom Mount TransducersTransom Transducers mount on the transom (back) of the boat in contact with the surface of the water. To prevent damage to the boat or transducer. Transom mount hardware is included with the transducer.Description: New...

B60 Tilted Element™ 12°12° titled version is designed for 8° - 15° deadrise anglesThe bronze B60-12° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in...

B60 Tilted Element™ 20°20° titled version is designed for 16° - 24° deadrise anglesThe bronze B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in...

Plastic Thru Hull TransducerPlastic Thru-Hull Transducers are for large boats and for boats with in-board motors that make typical Transom Mount Transducers ineffective. They are not recommended for trailered boats as the transducer is not flush...

M260 In-hullThe M260 is our high performance in-hull model for 300 W-1 kW echosounders. Its construction utilizes separate 50 kHz and 200 kHz elements for excellent deep-water performance and exceptional bottom and water column detail. The M260s...

525T-BHD Bronze Thru-Hull Transducer with Temp and High-Speed Fairing Block1kw50/200 kHz with Diplexer15x21 degree Beam Angle at 50 khz3x5 degree Beam Angle at 200 kHzBronze Thru-Hull with Temperature10-Pin ConnectorShips with High-Speed Fairing...

Bronze Thru-Hull Multisensor w/ 7 Inch Stem, 600w (10-Pin)600 Watts 50/200 kHz 40/10 degree Beam Angles Bronze Thru-Hull with 7' Stem, Speed and Temperature 30 Foot Cable with 10-Pin Connector

1kW thru-hull, 200/50KHz, 6/19deg,B260 Bronze, w/ID, w/fairing1kW thru-hull, B260 Bronze, w/ID, w/fairing. Operating frequency of 200 and 50 kHz. Beamwidth of 6 degrees at 200 kHz, 19 degrees at 50 kHz.

Commercial Grade Ultra-High Performance Thru-Hull2000 Watt capable High Performance bronze through hull transducer (R99) Fairing block includedCompatible with the following Echo Sounders: DSM250 and DSM300 SL Series: SL755RC, SL760RC , SL1250, and...

B60 Tilted Element™ 12°12° titled version is designed for 8° - 15° deadrise anglesThe bronze B60-12° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in...